Showing 37–48 of 63 results
-
Leak Saver Leak Shot Dye Inject Kit – Complete UV Dye Refrigerant Leak Detection Kit
87.00$- ULTRA BRIGHT UV DYE – The Leak Saver UV Dye Inject is the easiest way to inject UV leak detection dye into your air conditioning and refrigeration systems. No more messy syringes, hoses, or cans! Proudly MADE IN THE USA. The UV Dye illuminates brightly at the leak site when using a UV flashlight. Also visible to the naked eye. For best results, use a UV Flashlight in a shaded areas.
- WORKS WITH ALL SYSTEMS – Our product is compatible with all systems, refrigerants (except ammonia), and oils. It is great for central air conditioners, car and automotive air conditioners, refrigerators, ductless mini-splits, heat pumps, geothermal heat pumps, commercial refrigeration systems, micro channel coils and more. It also works with all refrigerants including R410A Freon, R22 and replacements, R134A, r1234yf, R404A, R290, R600a, and more.
- STRAIGHTFORWARD INSTALLATION – No more fussing with messy syringes, hoses, or pressurized cans. The Leak Saver injects directly and easily into the system with a basic manifold gauge set or even easier with our Leak Shot Injection Kits. Compatible with all refrigerants including R22, 410A, 134A, 404A, 507A, 600A. Fully compatible with mineral, PAG, and ester oils.
- WORKS IN AUTOMOTIVE SYSTEMS: For automotive systems, you will still need the standard 134A to 1/4” charging adapter. Mini-splits may require a 5/16” to 1/4” charging adapter. You can see our straightforward installation videos below.
- DYE ONLY. There is no leak sealant in this product. For leak sealants, see our other products (Leak Saver Direct Inject and Leak Saver Direct Inject UV Refrigerant Leak Sealers). For use in automotive air conditioners, you will also need a 134A quick connect adapter and a manifold gauge with 1/4″ hose connections. Safe for all manifold gauges, hoses, expansion valves (TXVs, TEVs, capillary tubes, etc), Schrader valves, and anything needed to service your system.
-
LED Light Fixture, 6278 lm, 5000K, 40W
1,650.00$Key Features
- Housing Finish Epoxy Powder Coated
- Hazardous Class Class I/Division 2, Class II/Division 1, Class II/Division 2, Class III/Division 1, Class III/Division 2
- Mounting Location Ceiling, Stanchion, Wall
- Shape Circular
- Max. Fixture Wattage 40 W
-
M 0ml Universal Joint Compound Hylomar
82.15$Description:
Hylomar M is a highly-engineered, polyester- urethane based non-setting and non-hardening gasketing compound. The compound is resistant to a wide range of fluids including industrial fuels, oils, water and brine, air, turbine and piston engine combustion products, water, water/glycol and methanol mixtures, petroleum and synthetic diester lubricating oils, gasoline and kerosene fluids (Avtur and Avcat) and fluorocarbon refrigerants. It can be used to seal both joint surfaces and threaded parts.
Instructions For Use:
The joint faces should be clean and dry. Both faces should then be coated with a thin even film of the product, and the solvent allowed to evaporate. The components can then be assembled. Since Hylomar M is non-setting, once applied to the faces of the component, immediate assembly is not required. Due to the nature of Hylomar M, re-torquing of assembled components may be required.
Typical Applications
Hylomar M enables the effective sealing of metal-to-metal and plastic-to-plastic components. Typical applications include water and oil pumps, instrument inspection covers, cylinder heads and sumps, coating pre-formed gaskets, weather proofing motors and outdoor high voltage circuit breakers inlet manifolds, timing case covers, oil pump joints, gear box and transmission components and thread sealing. It has also been successfully used in the assembly of gas turbines, water cooled generators and turbo vacuum systems. There is no staining of copper and silver, etc., from traces of volatiles at elevated temperature, and is therefore suitable for joints, and threads in close proximity to switch mechanisms. Hylomar M is harmless to joint materials. It is equally suitable for use as a gasket dressing and for metal- to-metal application.
Features
- Manufactured under license from Rolls Royce
- Due to remaining elastic, the compound seals parts permanently even if they are under constant vibration for years
- Strong adhesive properties. When drawn away from the surface, no fibers of the material are present. No dripping from vertical or downward facing surfaces
- Temperature range from -58F to +482F
- 50-state VOC complaint
- Minor conduction of heat
- Will not react with metal or other materials
- Resistant to fuels, oils, coolants, and gases
- Gap fill: 0.1 – 0.15mm
- Easy to disassemble components
- Use as a non-curing thread sealant
- Use as a gasket dressing to improve the sealing performance of the gasket and to assist gasket alignment during assembly
-
Needle Scaler, 1-19/64 In. Stroke, 10 CFM
650.00$Needle and Chisel Scaler Kit, Body Style – Air Tools In-Line, Duty Cycle – Air Tools Industrial Duty, Stroke Length 1 19/64 in, Blows per Minute – Air Tools 4,600, Air Inlet Size – Air Tools 1/4 in NPT, Average CFM @ 15 Second Run Time 3.65, CFM @ Full Load 10.0, Required Pressure 90 psi, Min. Hose Size 3/8 in, Overall Length 16 1/2 in, Housing Lock Bayonet Needle, Throttle Lever, Standards ISO15744, ISO8662-14, For Use With Chisels, Needles -
Oil and Water-Resistant, Noncorrosive RTV Gasket Maker, 70 mL, Gray, Temp Range
27.00$- RTV Gasket Maker, Color Gray, Container Size 2.37 fl oz, Container Type Tube, Full Cure Time 1 day, Cure Type Room Temperature, Maximum Gap Fill Size 0.2 in, Maximum Operating Temperature 400 Degrees F, Minimum Operating Temperature -65 Degrees F, Series SI 5699, Working Time 30 min, Product Form Paste, For Material Type Metal, Plastic, Resistance Properties Oil Resistant
