Related products

• 

  

  Industrial Equipment and Tools

  M 0ml Universal Joint Compound Hylomar

  Description:

  Hylomar M is a highly-engineered, polyester- urethane based non-setting and non-hardening gasketing compound. The compound is resistant to a wide range of fluids including industrial fuels, oils, water and brine, air, turbine and piston engine combustion products, water, water/glycol and methanol mixtures, petroleum and synthetic diester lubricating oils, gasoline and kerosene fluids (Avtur and Avcat) and fluorocarbon refrigerants. It can be used to seal both joint surfaces and threaded parts.

  Instructions For Use:

  The joint faces should be clean and dry. Both faces should then be coated with a thin even film of the product, and the solvent allowed to evaporate. The components can then be assembled. Since Hylomar M is non-setting, once applied to the faces of the component, immediate assembly is not required. Due to the nature of Hylomar M, re-torquing of assembled components may be required.

  Typical Applications

  Hylomar M enables the effective sealing of metal-to-metal and plastic-to-plastic components. Typical applications include water and oil pumps, instrument inspection covers, cylinder heads and sumps, coating pre-formed gaskets, weather proofing motors and outdoor high voltage circuit breakers inlet manifolds, timing case covers, oil pump joints, gear box and transmission components and thread sealing. It has also been successfully used in the assembly of gas turbines, water cooled generators and turbo vacuum systems. There is no staining of copper and silver, etc., from traces of volatiles at elevated temperature, and is therefore suitable for joints, and threads in close proximity to switch mechanisms. Hylomar M is harmless to joint materials. It is equally suitable for use as a gasket dressing and for metal- to-metal application.

  Features

  • Manufactured under license from Rolls Royce
  • Due to remaining elastic, the compound seals parts permanently even if they are under constant vibration for years
  • Strong adhesive properties. When drawn away from the surface, no fibers of the material are present. No dripping from vertical or downward facing surfaces
  • Temperature range from -58F to +482F
  • 50-state VOC complaint
  • Minor conduction of heat
  • Will not react with metal or other materials
  • Resistant to fuels, oils, coolants, and gases
  • Gap fill: 0.1 – 0.15mm
  • Easy to disassemble components
  • Use as a non-curing thread sealant
  • Use as a gasket dressing to improve the sealing performance of the gasket and to assist gasket alignment during assembly

  82.15$

  Add to cart

  Compare
• 

  

  Industrial Equipment and Tools

  Dixon PL400 Aluminum Air Fitting, In-Line Lubricator, 3/4″ NPT, 70 SCFM, 200 PSI, 3.7 ozs Oil Capacity

  Size	3/4″ NPT
  Material	Aluminum
  Brand	Dixon
  Item dimensions L x W x H	4 x 7 x 4 inches
  Connector Type	Plug
  Exterior Finish	Aluminum
  Thread Type	NPT
  Item Weight	1 Pounds
  Number of Pieces	200
  Manufacturer	Dixon Valve & Coupling

  About this item

  • Transparent sight disc allows visual inspection of oil level
  • Installation is recommended within 25 feet of the tool to be lubricated
  • Each time an air tool is operated, a fine mist of oil is injected into it along with the air from the compressor
  • Designed to protect portable or stationary air tools by efficiently oiling the tool mechanisms
  • Oil flow regulated by screwdriver screw adjustment

   

  102.00$

  Add to cart

  Compare
• 

  

  Industrial Equipment and Tools

  Valve Plate Carrier 06EA660143

  Part Info & Specifications

  Carrier 06EA660143 Replacement Part

  Includes:

  • (1) – Valve Plate (06EA660143)
  • (1) – Valve Plate Assembly (06EA405274)
  • (2) – Suction Valve (06EA500153)
  • (2) – Service Valve Gaskets (Ring) (6G651061)
  • (1) – Service Valve Gasket (2 Bolt) (6D401131)
  • (1) – Service Valve Gasket (4 Bolt) 6D681131)
  • (1) – Cylinder Head Gasket (SCOU) (06EA503334)
  • (1) Cylinder Head Gasket (Side Bank/Center Bank) (06EA503314)
  • (1) – Valve Plate Gasket (3 Tab) (06EA501853)
  • (1) – Cap Screw ( 06EA501543)
  • (4) – Dowel Pins ( 7J16032)
  • (1) – Washer (06EA500992)
  • (1) – Instructions (99TA526181C)

  Replaces Old Carrier Part Numbers

  • 06EA660066
  • 06EA660054
  • 06EA660068
  • 06EA500112
  • 06EA501363
  • 06EA660058
  • 06EA660142
  • 06EA660069
  • 06EA660060

  Other Part Numbers

  VALVE PLATE, Carlyle, 0 06 6241 05728 1, D/4,

  Fits Carrier, Bryant, Payne Models:

  06ER/EY099/399–, 06ER/EY150/450–, 06ER/EY165/465–, 06ER/EY166/466–, 06ER/EY175/475–, 06EY750-ARP—–, 06EY765-ARP—–, 06EY766-ARP—–, 06EY775-ARP—–, 06EY799-ARP—–, 06E-799-ARP—–

  658.95$

  Add to cart

  Compare
• 

  

  Industrial Equipment and Tools

  Laundry Systems D511255P Belt Cylinder-Rubber Face Pkg Alliance

  Alliance Laundry Systems D511255P Genuine OEM Replacement Part

  • Genuine Alliance OEM Part

  47.00$

  Add to cart

  Compare