1. Home
  2. Shop
  3. Industrial Equipment and Tools
  4. EMERSON VPGL-2HR (Copy)
EMERSON VPGL-2HR (Copy)

EMERSON VPGL-2HR (Copy)

Air compressor parts: Air filters, oil filters, oil-gas separator elements, screw rotors, piston assemblies, various valves (intake valves, pressure valves, etc.), cooling components, transmission parts (couplings, belts), sensors and controllers, etc.

Vacuum pump parts: Rotor vanes, impellers, seals, vacuum pump oil, blades, end covers, bearings, bushings, exhaust valve plates and other core components.

Fit Advantage: Regardless of equipment brand or model, suitable for daily replacement or upgrade, all parts can be purchased in one stop with worry-free adaptation.

845.00$

Compare
SKU: IN-75KWFS Category:

Description

Air compressor parts: Air filters, oil filters, oil-gas separator elements, screw rotors, piston assemblies, various valves (intake valves, pressure valves, etc.), cooling components, transmission parts (couplings, belts), sensors and controllers, etc.

Vacuum pump parts: Rotor vanes, impellers, seals, vacuum pump oil, blades, end covers, bearings, bushings, exhaust valve plates and other core components.

Fit Advantage: Regardless of equipment brand or model, suitable for daily replacement or upgrade, all parts can be purchased in one stop with worry-free adaptation.

Additional information

Weight 2 kg

Related products

  • M 0ml Universal Joint Compound Hylomar

    M 0ml Universal Joint Compound Hylomar

    Description:

    Hylomar M is a highly-engineered, polyester- urethane based non-setting and non-hardening gasketing compound. The compound is resistant to a wide range of fluids including industrial fuels, oils, water and brine, air, turbine and piston engine combustion products, water, water/glycol and methanol mixtures, petroleum and synthetic diester lubricating oils, gasoline and kerosene fluids (Avtur and Avcat) and fluorocarbon refrigerants. It can be used to seal both joint surfaces and threaded parts.

    Instructions For Use:

    The joint faces should be clean and dry. Both faces should then be coated with a thin even film of the product, and the solvent allowed to evaporate. The components can then be assembled. Since Hylomar M is non-setting, once applied to the faces of the component, immediate assembly is not required. Due to the nature of Hylomar M, re-torquing of assembled components may be required.

    Typical Applications

    Hylomar M enables the effective sealing of metal-to-metal and plastic-to-plastic components. Typical applications include water and oil pumps, instrument inspection covers, cylinder heads and sumps, coating pre-formed gaskets, weather proofing motors and outdoor high voltage circuit breakers inlet manifolds, timing case covers, oil pump joints, gear box and transmission components and thread sealing. It has also been successfully used in the assembly of gas turbines, water cooled generators and turbo vacuum systems. There is no staining of copper and silver, etc., from traces of volatiles at elevated temperature, and is therefore suitable for joints, and threads in close proximity to switch mechanisms. Hylomar M is harmless to joint materials. It is equally suitable for use as a gasket dressing and for metal- to-metal application.

    Features

    • Manufactured under license from Rolls Royce
    • Due to remaining elastic, the compound seals parts permanently even if they are under constant vibration for years
    • Strong adhesive properties. When drawn away from the surface, no fibers of the material are present. No dripping from vertical or downward facing surfaces
    • Temperature range from -58F to +482F
    • 50-state VOC complaint
    • Minor conduction of heat
    • Will not react with metal or other materials
    • Resistant to fuels, oils, coolants, and gases
    • Gap fill: 0.1 – 0.15mm
    • Easy to disassemble components
    • Use as a non-curing thread sealant
    • Use as a gasket dressing to improve the sealing performance of the gasket and to assist gasket alignment during assembly
    82.15$
    Add to cart
    Compare
  • 10000 PSI Hydraulic Hand Pump, No Gauge Connection Ralston Instruments

    10000 PSI Hydraulic Hand Pump, No Gauge Connection Ralston Instruments

      • XTHP Hydraulic hand pump
      • 3 ft Quick-test test hose
      • 1/4″ Male NPT process adapter
      • Bottle
    1,850.00$
    Add to cart
    Compare
  • Hydronix 45-2020 String Wound Water Filter Cartridge 4.5" x 20" - 20 M

    Hydronix 45-2020 String Wound Water Filter Cartridge 4.5″ x 20″ – 20 M

    About this item

    • String wound cartridge technology – 20 micron
    • Suitable for Commercial and residential applications
    • Pure 100% polypropylene string
    • High dirt holding capacity
    • 4.5″ x 20″, Fits most 4.5″ X 20″ housings
    57.99$
    Add to cart
    Compare
  • Dixon 1" NPT, 300 PSI, Dual-Lock™ P-Series Thor Interchange Female Thread Plug, Brass P4F8-B

    Dixon 1″ NPT, 300 PSI, Dual-Lock™ P-Series Thor Interchange Female Thread Plug, Brass P4F8-B

    P4F8-B | Dual-Lock P-Series Thor Interchange Female Thread Plug, Brass, 1″ Thread, 1/2″ Body, NPTF Thread, 1.55″ Maximum Outside Diameter (O.D.), 2.76″ Length, -40°F to 250°F, 300 PSI Rating, 3500 Burst PSI Rating, 1-7/16″ Wrench Flat, Dual-Lock P Thor Series.

    62.40$
    Add to cart
    Compare

Copyright by ModelTheme. All Rights Reserved.

Select at least 2 products
to compare